Target Pistol: Browning Buck Mark .22 with Gemtech Outback-II Suppressor

Browning Buck Mark .22 pistol with Tactical Solutions barrel and Gemtech Outback-II suppressorQuality .22 ammunition is under $.03/round and offers both negligible recoil and great accuracy.  Which makes it the ideal cartridge for target training.

Of course, since it’s hazardous to shoot a gun without a suppressor, you will probably want to buy a pistol that can be easily adapted to use a suppressor.  I actually shopped for my suppressor first.

Suppressor

Given the hassle and cost in acquiring a suppressor, I figured it would be wise to get a removable (threaded) can in case I wanted to use it on different guns.  Which made this an easy choice: The current standard in removable baffle .22 suppressors is the $300 Gemtech Outback-II.  As with any “Class III” NFA device, you have to pay an extra $200 to the feds and wait months for the BATFE to review your fingerprints and transfer application.  And if you live in one of the sixteen states that forbid private ownership of suppressors, all you can do right now is petition your government to stop restraining your right to own this safety accessory.

Gun

A lot of people buy Walther P22’s, which cheaply and easily accommodate a threaded end for attaching a suppressor.  But after reading some reviews criticizing the accuracy and trigger on that model, I decided to step up to either a Ruger Mark III or Browning Buck Mark.  And between these two the deciding factor was the following: The Ruger design integrates the receiver with the barrel, which means that the barrel itself falls under all of the federal firearms restrictions, and therefore any replacement threaded barrel would have to be purchased through a FFL dealer.  In contrast, the Buck Mark barrels completely detach from the gun so they aren’t regulated.

I bought a Buck Mark Camper — the model with the cheapest barrel I could find — for $275.  Then I paid another $200 for a 4.5″ aluminum-clad “Trail-Lite” barrel with a threaded end, from Tactical Solutions.  I could have instead paid $100 to have Gemtech (or many other gunsmiths) thread the original barrel, but the Trail-Lite has the distinct advantage of significantly reducing the weight forward of the trigger, so that gun stays very balanced even with the silencer hanging off the front.

I was originally thinking of getting a longer barrel to increase accuracy.  The problem is that longer barrels increase muzzle velocity.  Regular .22s shoot right around the speed of sound, and as soon as a bullet breaks the sound barrier it adds a “sonic crack” to the sound signature, which a suppressor cannot control.  The goal with this gun is to keep the bullet subsonic, and my final configuration delivers: I chronographed dozens of Federal 40gr Champion High Velocity rounds at just over 1000fps, with a stdev of just 7fps.  (The speed of sound in standard atmospheric conditions is 1100fps.)  And in the end, this setup seems to be as accurate as a shooter can be with conventional notch-and-post sights.

In order to enhance indoor, low-light shooting I upgraded the standard black front sight post with a $30 HiViz fiber sight.  It stands taller than the regular sight, but still within the range of the standard rear sight’s adjustment.  For practicing at home I bought a $50 “Do-All Bullet Box“, which reliably traps .17 and .22 rimfire bullets.  I shoot only in my garage, and would seriously recommend against shooting in living spaces: .22 bullets are typically unjacketed balls of soft lead, which spall when they impact anything, leaving shards of lead everywhere.  It’s easy to dump this out of the bullet box, but some of it is going to be vaporized into the air.  Also, even though the suppressor traps most of the propellant gas that normally blasts out the muzzle, there is plenty of leakage out the ejection port and one can smell it when I’m done shooting in the garage.

The gun itself is a pleasure to shoot.  It has nice beefy grips (though these would not be well suited to shooters with smaller hands), and a light, crisp trigger with minimal travel and reset.  The magazines can be painful to load without a $4 speedloader, so be sure to pick one up.

Shortcomings

Browning Buck Mark DisassembledThis is the hardest gun I have to clean, which is a shame because it’s also the cheapest to shoot, and also because unjacketed .22 rimfire seems to be the dirtiest ammunition this side of black powder.  Cleaning requires unscrewing two screws and dislodging the recoil spring from the rear post and then the plastic firing-pin assembly from the slide.  None of these steps are easy to do.  And you’re still left with that rear post on the frame, which prevents you from easily cleaning the barrel from the breach end without undoing a third screw to completely remove it.  (And I read reviews that said this is easier to clean than a Ruger!)

Advertisements

14 Responses to Target Pistol: Browning Buck Mark .22 with Gemtech Outback-II Suppressor

  1. Gabe N. says:

    Excellent article – I’ve found that the PatchWorm pull-through kit is very useful in cleaning firearms which are difficult to clean from the breech, such as the rimfire Ruger Mark II and III pistols, and the Ruger 10/22 rifle:

    http://patchworm.com/index.htm

    I’ve also found CCI Standard Velocity .22 ammo (stock #0032) to be very quiet, clean-burning and accurate in suppressed rimfire pistols and rifles.

  2. wyatt says:

    correct on the problems with walther p22. It just isnt made to the same quality as the ruger, browning or colt woodsman.

  3. Dennis says:

    I’ve been thinking about a Buckmark and I heard you’d need a new barrel as well but here in Finland, where I am, you can buy a silencer kit with an adaptor for about 80 euros, it’ll fit standard buckmark barrels or ruger mk.II/III’s without any problems. Silencers are unregulated here so it’s not hard to acquire.

  4. Robert says:

    Good article.
    As a long-time Buckmark owner, let me mention two things:
    First, mine was very accurate right out of the box and with cheap ammo.
    Second, it really likes to be clean, and frequently malfunctions when just a little dirty, unlike my AMT Lightning, 10-22, etc.
    But a quick shot of a spray cleaner will fix it right up without disassembly.

  5. Mark says:

    Dennis, when you say that suppressors are “unregulated,” can you just walk into a firearms store and buy one or are they any types of qualifications that you have to go through first?

  6. Romey says:

    it’s hazardous to shoot a gun without a suppressor? You must smoke some good stuff over there! Thats funny

    • bsquared says:

      thanks for the article…assume the hazard to shoot a firearm w/o a suppressor was a ‘quip’…the fed regs in the states make suppressors a pita so will have to think about acquiring one.

      • federalist says:

        A quip yes, but still true: You can’t get permanent hearing damage shooting a suppressed .22!

        It is a pain to register a suppressor. Hopefully more states will pass Firearms Freedom Acts which remove the federal tax and registration requirements for suppressors not acquired through interstate commerce.

    • John says:

      No, seems you’ve bought into too much movie crap.

      Suppressor’s should be used EVERYWHERE in the states, but they aren’t because of misinformation and stupidity.

      Suppressors save your hearing. They save the hearing of the guy at the bench next to you.

      It’s considered rude in many countries to show up at the range unsuppressed.

  7. […] Suppressed Buckmark […]

  8. Joseph Church says:

    Does that supressor act as a silencer, as well. And if so how would I go about purchasing the package?

  9. federalist says:

    Yes, baffle suppressors like these act to quiet the gun’s discharge, and most devices commonly called “silencers” are in fact baffle suppressors. We hesitate to call them silencers because the suppressed gunshot is still noisy, but at least it can’t cause permanent hearing damage.

    To assemble this package in the United States, assuming you aren’t forbidden from owning pistols or suppressors by the government:

    1. Buy the pistol through a gun dealer in your state.
    2. Order the threaded replacement barrel from Tactical Solutions.
    3. Order the suppressor through a Class III dealer in your state, and wait a few months for the BATFE to approve your purchase.

  10. J. cry says:

    The suppressor conversation aside, Buckmarks have one of the easiest take downs I’ve ever seen.Cleaning it is a breeze. I have not used unjacketed .22’s in ever even the cheapest Winchester at Wal-mart is jacketed so I’m not familiar w/ that but I promise they are very easy to clean, I did not understand that statement.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: